|
|
|
|
| SPECIALTY GAS POINT OF USE PANELS - MODULAR |
Western's Modular Point of Use Panels
FP250 SERIES
specs 
The FP250 point-of-use traps are designed to remove trace levels of oxygen from carrier gases such as argon, carbon dioxide, carbon, monoxide, helium, hydrogen, methane, or nitrogen. These are commonly used with gas chromatographs.
The FP250 point-of-use hydrocarbons and moisture traps are capable or removing oil and moisture to trace levels from air, helium, argon, nitrogen, and hydrogen.
The system will accomodate any number of panel sections while allowing for future expansion. Our systems are designed, cleaned and built to maintain high purity levels.
INSTALLATION TIP
You can combine several of these panels one after the other for complete gas filtration. The FP250 modular Series Filter Panels can also be combined with point-of-use regulator panels.
FEATURES
- Rust=free aluminum mounting panel .
- Each trap is pre-purged and pressurized with UHP helium to ensure leak integrity..
- The all-metal contruction eliminates potential contamination from outgassing or diffusion.
- Each trap is equipped with sintered type 316 stainless steel inlet and outlet filters to protect against absorbent migration into the downstream system.
DESCRIPTION |
OXYGEN TRAP
|
HYDROCARBON
MOISTURE TRAP
|
| Maximum Operating Pressure |
250 PSIG |
250 PSIG |
| Efficiency |
5 ppb when inlet levels are 10 ppm or less |
- |
| Capacity |
260 cm3 |
- |
| Maximum Flow |
5 SLPM |
35 SLPM |
| Inlet & Outlet Connection |
1/4" Compression (Stainless Steel) |
1/4" Compression (Stainless Steel) |
| Molecular Sieve Type |
|
13X |
|
| |
|
HOW TO ORDER - FP250 PART NUMBER MATRIX |
FP250 |
— |
Gas Service |
— |
Filter Type |
— | Options |
SERIES
|
|
(2) Air
(5) Helium
(6) Hydrogen
(7) Nitrogen
Other Please Specify |
|
HMT = Hydrocarbons & Moisture Trap
O2T = Oxygen Trap
CT = Combo Trap
|
|
SSFT = Stainless Steel Fittings, and Tubing
1/8" = 1/8" Compression Inlet & Outlet
|
For more information, call Western Customer Service
at 1-800-783-7890 for technical data sheets
|
|
| |
| |
| | |
